Compaq 380 Specifiche Scaricare il pdf (Pagina 62)

2-50 Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide

Smart Array 5i Controller

To remove the Smart Array 5i Controller:

1. Power down the server. See the “Powering Down the Server” section in this chapter.

2. Extend or remove the server from the rack. See the “Preparation Procedures” section in

this chapter.

3. Remove the access panel. See the “Access Panel” section in this chapter.

4. Remove the PCI riser cage. See the “PCI Riser Cage” section in this chapter.

5. Turn each of the four anchor pins one-quarter turn counterclockwise .

6. Lift the controller off the system board .

Figure 2-50. Removing the Smart Array 5i Controller

IMPORTANT: In the default position (off), the SCSI interlock disable switch prevents the ProLiant DL380

Generation 2 server from booting when the Smart Array 5i Controller is removed. If you operate the

server without the Smart Array 5i Controller for troubleshooting purposes, you must set the SCSI interlock

disable switch to on. For more information, see Chapter 4, “Connectors, LED Indicators, Switches, and

Jumpers.”

Reverse steps 1 through 6 to replace the Smart Array 5i Controller.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 120 121

Nessun commento

Compaq 380 Specifiche Pagina 62