Compaq ProLiant BL30p Specifiche

HP ProLiant BL30p Server Blade Maintenance and Service Guide May 2004 (First Edition) Part Number 354537-001

Illustrated Parts Catalog BL30p Server Blade Sleeve and Blanks Exploded View Figure 1-2: Sleeve and blanks exploded view HP ProLiant BL30p Server Bl

Illustrated Parts Catalog Server Blade Spare Parts List Table 1-1: Server Blade Spare Parts List Item Description Spare Part Number Mechanical Com

Illustrated Parts Catalog HP ProLiant BL30p Server Blade Maintenance and Service Guide 1-5 Table 1-1: Server Blade Spare Parts List continued Item

2 Removal and Replacement Procedures This chapter provides subassembly/module-level removal and replacement procedures for system components. After co

Removal and Replacement Procedures WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool b

Removal and Replacement Procedures WARNING: To reduce the risk of shock or injury from high-current electrical energy, do not reach into a power su

Removal and Replacement Procedures Server Blade Preparation To service any internal server blade component, you must power down the server blade and r

Removal and Replacement Procedures 3. Remove the server blade from the server blade enclosure: a. Press the release button (1). b. Open the lever (

Removal and Replacement Procedures Hard Drives To replace a hard drive: 1. Back up the server blade data. 2. Remove the server blade from the server

Removal and Replacement Procedures Figure 2-4: Removing a hard drive from the drive cage assembly Figure 2-5: Removing the center plate from the d

© Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties f

Removal and Replacement Procedures Figure 2-6: Removing a second hard drive IMPORTANT: Be sure the hard drive label is on the top side of the hard

Removal and Replacement Procedures Figure 2-8: Replacing the center plate NOTE: Be sure that the jumper on the drive is set to Cable Select (CS) s

Removal and Replacement Procedures Figure 2-10: Reinstalling the drive cage assembly 2-10 HP ProLiant BL30p Server Blade Maintenance and Service Gu

Removal and Replacement Procedures DIMMs To remove a DIMM: 1. Power down the server blade and remove it from the server blade enclosure. Refer to the

Removal and Replacement Procedures Processors and Heatsinks CAUTION: If installing only one processor in the server blade, be sure to install a pro

Removal and Replacement Procedures To remove a processor: 1. Remove the heatsink (3). CAUTION: The heatsink is not reusable and must be discarded

Removal and Replacement Procedures 2. Remove the processor (2). Figure 2-14: Removing the processor To replace the processor: CAUTION: When inst

Removal and Replacement Procedures CAUTION: Be sure that the processor socket locking lever is closed. Do not force the lever closed after the proc

Removal and Replacement Procedures 4. Align the heatsink and install onto processor (1). 5. Close the heatsink brace (2). 6. Close the heatsink loc

Removal and Replacement Procedures Fan Assembly To remove the fan assembly: 1. Power down the server blade and remove it from the server blade enclos

Contents About This Guide Audience Assumptions...

Removal and Replacement Procedures Dual Port Fibre Channel Adapter To remove the Dual Port Fibre Channel (FC) adapter: 1. Power down the server blade

Removal and Replacement Procedures NIC Riser Board To remove the NIC riser board: 1. Power down the server blade and remove it from the server blade

Removal and Replacement Procedures Power Converter Module To remove the power converter module: 1. Power down the server blade and remove it from the

Removal and Replacement Procedures Power Button/LED Cable The power button/LED cable is included in the cable kit. To remove the power button/LED cabl

Removal and Replacement Procedures Server Blade Handle The server blade handle contains a serial number that maintains the original server blade warra

Removal and Replacement Procedures System Board Assembly To replace the system board assembly: 1. Power down the server blade and remove it from the

Removal and Replacement Procedures Battery If the server blade no longer automatically displays the correct date and time, you may need to replace the

Removal and Replacement Procedures To remove the system board battery: 1. Power down the server blade and remove it from the server blade enclosure.

Removal and Replacement Procedures ProLiant BL30p Blade Sleeve Removing the Blade Sleeve CAUTION: Be sure that the ProLiant BL30p server blade and

Removal and Replacement Procedures Removing the Blade Sleeve Board To remove the blade sleeve board: 1. With the blade sleeve on a flat surface, remo

Contents Chapter 3 Diagnostic Tools ProLiant BL p-Class Diagnostic Tools ...

Removal and Replacement Procedures Server Blade Blanks CAUTION: Always populate server blade enclosure bays with either a server blade, a populated

Removal and Replacement Procedures HP ProLiant BL30p Server Blade Maintenance and Service Guide 2-29 Figure 2-30: Removing a 3U server blade blank

3 Diagnostic Tools ProLiant BL p-Class Diagnostic Tools Use the following tools to diagnose problems, test hardware, and monitor and manage system ope

Diagnostic Tools Table 3-1: Diagnostic Tools continued Tool Description How to run the tool HP Systems Insight Manager (HP SIM) HP SIM provides com

Diagnostic Tools HP ProLiant BL30p Server Blade Maintenance and Service Guide 3-3 Table 3-1: Diagnostic Tools continued Tool Description How t

4 Connectors, LEDs, and Switches Connectors ProLiant BL30p Server Blade Front Panel Connectors The server blade has one front panel connector for conf

Connectors, LEDs, and Switches Rear Panel Connectors Use Figure 4-2 and Table 4-1 to identify ProLiant BL30p server blade rear panel connectors. Figu

Connectors, LEDs, and Switches System Board Components and Connectors Use Figure 4-3 and Table 4-2 to identify ProLiant BL30p system board components

Connectors, LEDs, and Switches Figure 4-3: ProLiant BL30p system board components and connectors 4-4 HP ProLiant BL30p Server Blade Maintenance and

Connectors, LEDs, and Switches Table 4-2: System Board Components and Connectors Item Description 1 Power button/LED board connector (under the fan

About This Guide This maintenance and service guide can be used for reference when servicing HP ProLiant BL30p server blades. WARNING: To reduce t

Connectors, LEDs, and Switches Refer to Figure 4-4 to identify the I/O icon. Refer to Figure 4-5 and Table 4-3 to identify local I/O cable connectors.

Connectors, LEDs, and Switches Figure 4-5: Local I/O cable connectors Table 4-3: Local I/O Cable Connectors Item Description 1 Server blade conne

Connectors, LEDs, and Switches LEDs ProLiant BL30p Server Blade Front Panel Six LEDs on the front of the server blade indicate server status. Use Fig

Connectors, LEDs, and Switches Table 4-4: ProLiant BL30p Server Blade Front Panel LEDs Item LED Description Status 1 Server Blade Unit Identificat

Connectors, LEDs, and Switches Switches and Buttons Use the following sections to identify the locations and functions of push-button and system switc

Connectors, LEDs, and Switches System Switches System switches enable you to change certain settings or to perform advanced diagnostic procedures. Use

Connectors, LEDs, and Switches NMI Switch Crash dump analysis is an essential part of eliminating reliability problems such as hangs or crashes in ope

Connectors, LEDs, and Switches 7. Repeat steps 1 through 3. 8. Change position 6 of SW1 to off. 9. Repeat steps 5 through 7. IMPORTANT: When the

Connectors, LEDs, and Switches 4-14 HP ProLiant BL30p Server Blade Maintenance and Service Guide Accessing the Redundant ROM If the system ROM is c

5 Server Blade Specifications This appendix provides operating and performance specifications for the following: • • ProLiant BL30p Server Blade ATA H

About This Guide CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in.) of clearance at the front and back of the se

Server Blade Specifications 5-2 HP ProLiant BL30p Server Blade Maintenance and Service Guide ATA Hard Drive Table 5-2: ATA Hard Drive Specificati

Index A D access panel, spare part number 1-4 DC-to-DC converter, location 4-5 ASR See Automatic Server Recovery (ASR) diagnostic tools 3-

Index H M handle memory See DIMMs removing 2-22 replacing 2-22 N hard drive NIC riser board spare part number 1-5 removing 2-19 specificat

Index HP ProLiant BL30p Server Blade Maintenance and Service Guide Index-3 replacing battery 2-25 blade sleeve board 2-27 DIMMs 2-11 Dual Port

About This Guide Telephone Numbers For the name of the nearest HP authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, cal

1 Illustrated Parts Catalog This chapter provides illustrated parts and spare parts lists for the HP ProLiant BL30p server blade components. Refer to

Illustrated Parts Catalog ProLiant BL30p Server Blade Components System Exploded View Figure 1-1: System exploded view 1-2 HP ProLiant BL30p Serve